Lazer Lamps Evolution high beam headlight with E-mark ST-6

Lazer Lamps ST-6 Evolution

LED high beam headlights with E-mark, reference number 10. Six 11-watt high-density LEDs. Hybrid light distribution. For on-road and off-road use.

With a luminous flux of 6,204 lumens, the Lazer Lamps ST6 Evolution headlight has nearly the same power as two xenon high beams or is as bright as six H4 halogen high beams. The hybrid beam pattern provides excellent range and wide illumination in the near and mid-range, offering the driver outstanding night vision. The beam range is approximately 680 meters.

The power consumption is 70 watts. At a vehicle voltage of 14.4 volts, the current is approximately 4.7 amps.

The headlight has a width of 284 mm, a height of 64 mm, and a depth of 68 mm. It weighs 912 grams.

Delivery includes central mounting 1114K.

ST EVOLUTION SERIES: The LED HIGHLIGHT

The ST Evolution series headlights from Lazer Lamps are the logical next step in the evolution of the highly successful and proven ST series, a proven performer in both the on- and off-road markets. This new evolutionary stage, featuring 11-watt high-density LEDs, offers even greater performance, increased range, and optimized light distribution. While maintaining the same width, the headlights are now slightly flatter and require significantly less installation depth. Furthermore, these ultra-rugged, IP69K-certified headlights are now available in a wider range of configurations: versions with two, four, six, eight, and twelve LEDs.

The headlights with two LEDs are particularly attractive for motorcycle and quad riders, while two large ST12 Evolution headlights can easily replace a conventional LED light bar - and of course with genuine ECE approval as high beam headlights and the outstanding Lazer performance.

The fastening is done via a central,

Adjustable bracket that can be mounted on top or bottom with a 10 mm thread.

A side mounting kit is available as an option.

The connection cable is 70 cm long.

Plugs are included.

Optional connection cable sets are available.

ECE approval

The ST series LED headlights have ECE approval according to R112 as high beam headlights and can be installed on motor vehicles without registration.

According to ECE Regulation 48, two or four high beam headlights may be fitted to all motor vehicles.

Six high-beam headlights are also permitted on motor vehicles used for the transport of goods over 12 tonnes.

There are no regulations regarding planting positions.

The sum of the reference numbers of all high beam headlights must not exceed 100.

The reference number is printed on each headlight.

Halogen or xenon headlights usually have a reference number of 17.5 or 20.

The reference number says nothing about the absolute brightness of the headlight.

but only via the brightest point. That's why conventional headlights

A bulb typically has a higher reference number than an LED headlight with multiple LEDs.

The limitation of the sum of the reference numbers of the headlights serves to...

to limit the maximum glare from oncoming vehicles with high beams switched on.

Delivery: 1 piece